In association with:

HobbyTron.com Blow Out Specials - Up to 60% Off (Limited quantities)

Frontline Hobby - Electronics


1-Hour Universal Start/Stop Timer Kit
This universal, 1 Hour timer, has unlimited applications. The timer is adjustable from 20 seconds to 60 minutes. It also includes a 3 Amp 110VAC/ 24VDC output relay and START/STOP switches. Runs on 9 Volts DC or 6 Volts AC @ 100mA. Comes with complete instructions and diagrams for assembly. Easy to build and very reliable.

Telephone Kit (E-AK700)
Build this high-tech, see-thru plastic telephone. Learn theory on how telephones work and then proudly show off your work with the transparent phone case. The set includes automatic redial, ringer turn off switch, 4 neon bulbs for visual indication of telephone working, and wall mounting cradle. The sectionalized construction and testing makes this fun and interesting project.

Music Lights Kit with case
See music come alive! Three different lights flicker in time to music, one light each for low, mid and high frequencies. Each is individually adjustable, runs on 120 VAC and controls up to 300 watts per channel, enough to drive spotlights, Christmas lights, etc. Just like the rock concerts and Vegas shows. 3 different lights flicker to music lows, mids, and highs. This kit does not come with any sockets for lights or a power cord to plug the kit into the wall. Runs on 120VAC. Controls up to 300 watts per channel!

Telephone Amplifier Kit
This telephone-amplifier can be used either as an independent amplifier with loudspeaker, for instance to follow a telephone-conversation, or one can connect it's output to an amplifier or a mixing-panel (e.g. radio-stations).

Clearance Item - Alien Blinker Kit (Limited Stock)
This is a great first kit to build. Easy instructions and fun to let your imagination "run away with itself". Watch out for the aliens! When they see this blinking LED, they will want to 'call home'. E.T., where are you? Easy to build and maintain. Comes with complete instructions along with drilled and etched circuit board.

Motion Detector - Infrared
This is an excellent security device, sees infrared heat of intruder in field of view. This is a recent design for a PIR detector; should not be underestimated. Rather than the usual opamps and amplifiers, this kit uses a movement IC. Has PC board mounted Fresnel lens. IC has circuits to turn off detector in day light. Two levels of sensitivity. When tripped an LED indicator lights and a relay is tripped. "Sees" up to 18 feet. It operates on 9 to 12 volt battery with very long life, and light sensitivity is adjustable for day/night use. The alarm on-time is also adjustable. Connect a low voltage siren, or relay to switch larger load.

Mini FM transmitter - TV, CD Player, Walkman - FM Transmitter Kit - Fully Assembled - UK165
This is a mono FM transmitter that is specially designed to be connected directly to the headphone output of your Walkman or any other type of audio source with a headphone jack. It includes a stereo input circuit which will mix the left and right stereo channels into a single mono signal. The input is equipped with inductors that will match completely with the headphone output and therefore prevent any possible interference noise. The transmitter is easily tunable to the entire FM commercial band (88 - 108 MHz) using an adjustable coil and is stable in frequency. An ON/OFF switch and LED indicator are also incorporated right on the board. A battery holder is included, as well as a stereo plug which makes it very easy to connect to any audio device.

Clearance Item - Audible Continuity Checker Kit (Limited Stock)
Checking resistors, speakers, and fuses is easy with this audible continuity checker. Keep it handy in a drawer or on a workbench. Check line cords, light bulbs, etc. Easy to build and maintian. Comes with complete instructions.

Soldering Iron Stand
The perfect place to put your soldering iron! Use with any soldoering iron.

Clearance Item - Siren Code Oscillator Kit (Limited Stock)
This kit is fun as both an up-down siren and Morse Code Oscillator. You can entertain your friends by pumping this sound through a P.A. amplifier with your Sci-Fi imagination running wild. Easy to build and maintain. Runs on a nine-volt battery. Comes with complete assembly and operation instructions.

Clearance Item - 87-Led Digital Alarm Clock Kit (Limited Stock)
This Digital Alarm Kits has two circuit boards. One with 87 Super Bright Red LEDs to read the hours and minutes and one for the clock chip. Comes complete with a Melody Generator Alarm. It can be used as a 24 hour Digital Timer. It is visible even in sunlight. Comes with complete instructions. Power Needed: 18VAC Center-tapped (2X9VAC 300 mA) Transformer (NOT PROVIDED) PC board measures 92 by 60mm. Display board is 166 X 75 mm. Fun to build and will last a lifetime.

Pink Noise Generator Kit
To analyze the acoustic properties of a room (usually a living-room), a good pink noise generator together with a spectrum analyzer is indispensable. You also need a microphone with a linear frequency characteristic (from 20 to 20000Hz).

Clearance Item - Super Sensitive 2x8 LED Mono Audio Level Indicator (Soldering Kit) (Limited Stock)
This super sensitive LED VU-Meter incorporates its own pre-amplifier and therefore it can be connected directly to the line-out of any audio source. It uses 2 rows of 8 LEDs which creates a fantastic light display. Supply voltage: 9 -12V DC @ 200mA. Recommended power supply: Kit CK341V12 / UK341V12.

Phone transmitter - FM Transmitter Kit
Listen to those 'private' calls! This is a very popular kit, and you know why. It transmits both sides of the conversation of a telephone call to any FM radio. Comes with all the necessary quick connections to make hook-up fast. No batteries needed!! It takes its power from the telephone line. 100 foot range even through walls. Build one today and let the fun begin! Can be ordered assembled. Measures 2.5cm x 4.5cm.

10-Led (ROUND) Stereo VU-Meter Kit
A compact stereo VU-Meter based on two integrated circuits which insures a high input sensitivity. Voltage: 5 - 14 VDC @ 100 ma. Comes with complete instructions and etched, silk-screened circuit board. Can be ordered assembled.

LED Light Organ Kit
For different applications such as: sound indicator, simple sound-to-light for music. For the heard of hearing : can be used to indicate the telephone, doorbell, barking dog.

Clap On/Clap off Switch (Special Deal)
With this switch you can operate your lighting with a simple handclap. It is ideal for disabled or elderly people and has good immunity against surrounding noises. It has easy clap mode with '1-clap' and '2-clap' mode selection. The '2-clap' mode features built-in safety turn-off timer (5h approx.). It has microprocessor controls and output relays with LED-indicator.

Electronic Rat Blaster Repeller Kit
Sure, you've seen these things advertised before. Big claims and a huge price, well we won't carry on about how you'll be able to keep Godzilla out of your garbage cans, but we will say this unit will do a nice job of keeping the neighborhood dog, cat or deer away. Here's the story, we had a problem at the boss's house keeping the deer out of the garden. The boss, being the electronic nut he is, bought one of these things and tried it. It worked pretty good so he figured to get another for protecting the shrubs, but at $150 a box, figured he could build his own cheaper. Here it is, cheaper and better! We?ve increased the power, put in a top-quality transducer (by Motorola), better frequency range and made it affordable. Build it into your own case or use our rugged, all metal matching case set. Runs on 12 VDC or use our AC adapter. (Hum-m-m, I wonder if this will work on kids!)

Mini FM transmitter - TV FM Sound Transmitter Kit
This is great for listening to TV at the volume you need while not disturbing others. It transmits the TV audio to any FM radio and you can have earphones on listening at any volume level you may need. Great for people who are hard of hearing. Just connect it to the TV speaker output. Comes with complete instructions and all parts necessary to build it including drilled and etched circuit board. Requires 4 AA size batteries. Can be ordered assembled.

Clearance Item - VU Meter - 2x15 LED Stereo VU Meter Kit (Limited Stock)
This unit allows you to instantly visualize signal levels from a whole range of different audio sources. For use with mixing panels, amplifiers, CD players, radio's,... A special input is provided, which allows direct connection to a speaker output. You can select DOT or BAR mode, to suit your application. The kit comes with an attractive display window, which can be used both horizontal and vertical. If necessary, the unit can be calibrated by means of a trim potentiometer. This unit can be used with the Velleman mixing panel. Hook it up to a Video camera through a standard stereo headphone 1/8 mini jack: This has terminal pins to solder to. With an adapter cable you make from the headphone jack to the PCB, you can use it as described. Requires a 12-15vdc power supply at 300mA.

Browse other pages
Index 1 2 3 4 5 6 7 8 9 10

Search this website
Google
  Web www.pantera-designs.com